plasma cnc 5 axis automatic steel pipe cutting machine

Rotating Shaft CNC Circle Tube Low Cost CNC Plasma Cutting Machine

Pipe cutting

Technical parameters of Plasma CNC 5 Axis Automatic Steel Pipe Cutting Machine

1.Pipe diameter applicable:Φ50-Φ600/800/1200/1500mm

2.Cutting Pipe wall thickness: 1-8mm (plasma cutting) or as per plasma generator; 5-60mm(flame cutting)

3. Cutting speed: plasma cuttingspeed: 50—3800 mm/min;

flame cutting speed: 50-750mm/min

4. Number of axis under control: 3-6 Axes

Work piece axis of rotation(X)

Cutting the first work piece along the axis of axial movement(Y)

Cutting torch along the axial swing axis work piece (Z)

Cutting torch along the work piece swing radial axis (W)

Cutting the first spindle axis vertical take-off and landing (U)

Cutting nozzle strength out and draw back axis (V)

5.Angle of bevel: plasma cutting±45°(adjustable);flame cutting:±60°(adjustable)

6. Cutting Pipe length: ≤12000mm

7. Max load pipe weight: 4000KGS

8. CNC system: original import IPC

9. Control way: full CNC control with touch screen & man-machine interface

10. Integrated precision of the machine:

Portrait Moving Error: ≤±0.2mm/1000mm

Turning Angle Error: ≤1° per 180°

Surface quality: Clean and no dregs

Repeat positioning accuracy: ≤±0.3mm

Basic Configuration of Plasma CNC 5 Axis Automatic Steel Pipe Cutting Machine :

NC pipe Profile cutting machine mainly are consists of the control system, machine arm system, driving unit, clamp unit, support unit, guide rail, airway system, control cabinet and operation table, etc. One set of flame cutting system (including plasma cutting) is provided as the main cutting system. (Or as per customer’s request)

Positioning Precision

(1)X Axis()
Driving systemDriving by precise gear box and transmission gear pair
Servo motorPanasonic motor
Positioning precision±0.1mm
(2)Y Axis()
Driving systemDriving by Precision gear box, transmission by gear and rack
Track length for cutting head(Max travel stroke)12000mm
Servo motorPanasonic motor
Positioning precision±0.2mm
(3)Z Axis()
Driving systemDriving by precise gear box
Swing angle±60°
Servo motorPanasonic motor
Positioning precision±0.1mm
(4)W Axis()
Driving systemDriving by precise gear box
Swing angle±60°
Servo motorPanasonic motor
Positioning precision±0.1mm
(5)U Axis()
Driving systemDriving by precise gear box and ball screw
Stroke of cutting head400mm
Servo motorPanasonic motor
Positioning precision±0.2mm
(6) V Axis(√)
Precision gear box, ball screw transmission
Cutting head up and down stroke100mm
Servo motor Panasonic motor
Position accuracy±0.2mm

Refer to the Product Manual (omitted).

The max angle of bevel: Vertical and horizontal direction ± 60 °

Orthogonal mother riding a tube-type cutting openings
Minimum cross-cutting angle: ± 30 °Orthogonal mother tube insertion opening-cutting
Cutting speed automatic stepless variable speed regulationOrthogonal and oblique cut-side branch pipe
Continuous Cutting SetOrthogonal and oblique eccentric mother pipe cutting
Fixed-point and fixed-angle bevel settingsOrthogonal and oblique eccentric cutting branches
Vertical pipe and slope-side cuttingMulti-tube mother intersection pipe opening face cut
Home bias pipe opening face cutMulti-pipe intersection cut-side branch pipe
Home bias pipe opening eccentric cutting surfacePossession of ocean engineering at both ends of the tube cutting bias
Mother pipe rectangular cutting surfaceTube welding elbow, "shrimp" oblique section cutting
Mother trough control center, cutting eccentricpipe ovality error automatic tracing

Safety set

1). Machine moving set has limit position device or safety guard device in certain position.

2). Emergency stop device in certain position.

3). Refer operator’s manual for plasma source safety guard.

4). Machine, cutting power source should grounding, control system should also isolate and grounding (C type grounding, grounding resistance under 10Ω)

Working environment of Plasma CNC 5 Axis Automatic Steel Pipe Cutting Machine

1). Power source: 3-phase 380V ±10%

2). Frequency: 50Hz

3). Place: Indoor

4). Temperature: 0℃~40℃

5). Relative humidity: ≤95% without condensation

6). Installation ground: Concrete structure, base concrete thickness ≥200mm.

7). Plasma gas (for carbon steel): O2 /Air

Plasma gas pressure and flow:

O2: 0.8Mpa, flow>4.3m3/h

Air: 0.8Mpa, no oil and water, flow>10.0m3/h

8). Flame oxygen pressure 0.7-1.0 MPa


Q: Can your machine be customized ?

A: Yes, we are a professional manufacturer specialized in automatic welding

equipment more than 10 years, we have a strong design & technical team,

we can design and manufacture as per your requirements.

Q: How to get an accurate quotation ?

A: Please provide us the detail of the workpiece such as drawing or thickness and width.

Q: What’s the shipping cost from China to your country ?

A: We can send machine to your port or door address by sea or airplane.

Please kindly tell us your nearest port or address with postcode. We have reliable shipping agent

to ensure the safe,convenient and timely delivery.

Q: Payment terms, MOQ, warranty, FOB...

A: Payment terms: 30% down payment against order by T/T, the balance of 70% to be paid on


Minimum order quantity: 1 set, FOB Qingdao.

Delivery time: about 45 days after receipt of formal order and 30% deposit.

Warranty: 12 months following delivery. We offer online service 24 hours all day long, Skype,

Email etc. You can contact us any time, if urgently, please call us.

Q: what’s the package ?

A: Fumigation-free plywood case with wrapping film.

Q: Do you offer teaching & training ?

A: Training at supplier’s plant.

Q: what’s policy for guarantee and broken parts ?

A: Warranty period of equipment is one year, during this time the broken parts and spares

caused by quality can be offered free.

Quick Details

Condition: New
Place of Origin: Shandong, China (Mainland)
Brand Name: JIAXIN
Voltage: 380v
Rated Power: 2.0-3.0kw
Dimension(L*W*H): 4.0*1.2*1.7m
Weight: 2.0-3.0t
Certification: other
Warranty: 12 months
After-sales Service Provided: Engineers available to service machinery overseas
Type: Plasma CNC 5 Axis Automatic Steel Pipe Cutting Machine
Model: HYSD
Cutting source: plasma and gas
Plasma cutting thickness: as per plasma power
Gas cutting thickness: 5-120mm
Loading capacity: max 6t
Work piece length: max 12m
CNC system: IPC
Driving system: Servo and AC motor
Cutting diameter: 50-800mm

, ,